News

  In large-scale infrastructure construction, mineral extraction, and complex terrain construction scenarios, traditional earth-moving machinery often shows obvious shortcomings: unstable power output leads to large fluctuations in daily work volume, poor fuel economy increases long-term operating costs, and frequent equipment failures in complex conditions affect the continuity of the project. When customers need to coordinate the joint operations of multiple equipment such as Truck Crane and Aerial Work Platform GF, the insufficient performance of the excavator is more likely to cause overall progress delays, resource idleness, or safety risks, becoming a key factor limiting project benefits.    The XCMG XE3870CA crawler excavator is designed with "efficiency, reliability and coordination" as its core. It is equipped with a customized powertrain and an intelligent control system. Compared to traditional models, its daily earthwork output has increased by 30%, while fuel consumption has decreased by 20%. It is suitable for various scenarios such as mining, municipal road construction, and port logistics and storage areas. It forms a "ground-air-heavy" three-dimensional operation system with Truck Crane and Aerial Work Platform GF, enabling simultaneous completion of heavy object lifting, high-altitude maintenance, and deep earth excavation tasks, significantly shortening the project cycle and reducing the overall cost.  Product Features Strong power and precise control: Equipped with the Cummins QSL9.3 turbocharged engine with a rated power of 225kW, combined with the EPB electronic control positive flow system, it enables real-time matching of power output and hydraulic response, maintaining stable operation efficiency even in complex working conditions. All-terrain adaptability: Reinforced crawler plates and four-wheel-and-one-axle design, with a ground pressure of only 38kPa, allowing for flexible movement in complex terrains such as soft soil, slopes, and gravel areas, reducing the risk of getting stuck or skidding. Intelligent maintenance management: The 7-inch color touch screen integrates fault diagnosis, work mode switching, and remote monitoring functions, supporting real-time data transmission, facilitating early warning of equipment abnormalities, and reducing the probability of downtime and maintenance. Tips for use Regularly inspect the hydraulic system: Replace the hydraulic oil and filters every 500 hours to prevent impurities from entering the system and causing valve body wear or sluggish operation. Optimize the use of the bucket: When operating in hard rock layers, avoid single high-load impact and adopt the "layer stripping + intermittent excavation" strategy to extend the lifespan of the bucket teeth. Adjust the crawler tension in stages: Adjust the crawler tension promptly according to terrain changes (such as from soft soil to hard ground) to prevent crawler plate fractures or drive wheel wear due to improper tension.  

  For those engaged in foundation engineering, they all know that pile driving operations often encounter three major challenges: insufficient power to drive, unstable machine body prone to shaking, and high fuel consumption resulting in high costs. Especially in overseas large-scale infrastructure projects, with complex geology and tight schedules, ordinary equipment has low efficiency, frequent malfunctions, and wasted time and money. Moreover, there is a wide variety of equipment on the market, many small factories' machines are not usable, and there is no after-sales guarantee. Overseas procurement is even more afraid of encountering problems. To address these pain points, XQHM brings XCMG XE600DP hydraulic pile driver (model abbreviation 600), specifically designed for heavy pile construction projects, to solve the problems of difficult pile driving, low efficiency, and high costs. It is suitable for various large-scale construction scenarios overseas. Just like Truck Crane, Scissor Lift, and Wheel Loader, it is a core equipment for engineering and widely used in high-speed, railway, bridge, port and other large infrastructure construction, meeting the needs of pile driving in complex geological conditions. The core parameters of this equipment are outstanding: operating weight 58,000 kg, recommended excitation force 600 kN, engine rated power 280 kW/2000 rpm, maximum pile driving height 16,280 mm. With a large weight and strong power, it piles firmly and powerfully. Product features Powerful and fuel-efficient: Equipped with a special engine from XCMG, customized torque curve, low speed and high torque, it is powerful enough to work and can also reduce fuel consumption, saving a lot of costs in the long run. Stable and durable machine body: Strengthened and increased working arm, combined with reinforced walking frame and X-shaped beam structure, has strong bearing capacity, can operate stably in hard soil and complex conditions, and is not prone to damage. Strong excitation force and high efficiency: Equipped with a dedicated hydraulic vibration hammer, imported hydraulic motor and shock-absorbing rubber block, 600 kN excitation force, fast pile driving speed, no delay in construction schedule. Practical tips Before operation, check the hydraulic system and shock-absorbing blocks to avoid failures and extend the machine's lifespan. It can be adapted to various pile types such as steel pipe piles and steel sheet piles, and one machine can handle multiple operations, without the need to add additional equipment. XCMG's genuine products, with a complete overseas after-sales system, stable parts supply, and no worries about procurement. Whether it's large-scale infrastructure or port and dock projects, XCMG XE600DP hydraulic pile driver can efficiently handle them, helping overseas customers reduce costs, improve efficiency, and minimize malfunctions.

    In fast-paced engineering projects, efficiency is the lifeline. However, many construction teams are often plagued by stubborn problems: the operation scenarios are complex and changeable, requiring frequent switching of different types of equipment; dedicated parts are hard to come by, and a minor repair can lead to the entire operation line coming to a halt; coordinating multiple machines and their operators is not only costly but also prone to errors. These pain points undoubtedly slow down the project progress and increase management burdens.  Fortunately, the emergence of the XQHM series XE210WGA engineering equipment from XCMG Group has precisely targeted these pain points. With its outstanding feature of "one machine with multiple uses and high-efficiency compatibility", it has brought a revolutionary improvement to construction efficiency.  I. Core Advantage: Simplifying Complexity, Multi-functional in One The core value of the XE210WGA lies in its powerful functional integration and compatibility. It condenses tasks that traditionally require multiple machines in construction into a single unit.  With multiple functions in one machine and seamless adaptation to various working conditions, this equipment, through its modular design and advanced hydraulic system, can quickly switch between different working attachments. Whether it is to assist in high-altitude operations in conjunction with a scissor lift or to collaborate with a wheel loader for material loading and transfer, the XE210WGA can handle it with ease. This means that in continuous processes such as site leveling, material handling, and small-scale lifting, there is no longer any need to worry about the sequence and waiting time for different equipment to enter and exit the site. One machine can smoothly connect the processes, greatly simplifying on-site scheduling.  The parts are universal, making maintenance and repair effortless. The bottleneck in equipment maintenance often lies in parts. The XE210WGA adopts industry-standard universal specifications for key components such as hydraulic interfaces and connectors, which are highly compatible with common crane parts. This brings two major benefits: first, parts procurement is easy, eliminating the need to wait for a long time for custom-made parts; second, it reduces the cost of parts inventory. When the equipment needs repair, alternative parts can be found quickly, significantly reducing equipment downtime and ensuring the continuity of the project.  Intelligent and efficient, reducing comprehensive operating costs. In addition to directly saving equipment procurement costs, the XE210WGA also demonstrates significant advantages in "soft costs". Reducing the number of devices means reducing the corresponding demand for operators and the coordination and management links between devices. Project managers no longer need to arrange dedicated personnel to dispatch multiple devices, and operators only need to be familiar with one main unit to handle various tasks. This not only improves efficiency but also reduces labor costs and management risks.  II. Practical Performance: Word-of-Mouth Endorsement and Efficiency Speak Volumes Real user feedback is the best testament to a product's value.  Team leader Wang of the construction team expressed with deep feeling, "In the past, just coordinating scissor lifts and wheel loaders was enough to give one a headache. Since the introduction of the XE210WGA, one machine can do the work of several. What's most satisfying is that even if critical components like crane parts are damaged, universal replacement parts can be found quickly, without delaying the project progress at all. The overall efficiency has improved significantly!"  Master Li, the equipment supervisor, gave a highly positive evaluation from the maintenance perspective: "This equipment is very intuitive to operate and requires very little maintenance. I no longer need to keep an eye on the maintenance calendars and special oils for several different devices every day, which has greatly reduced my workload. In the long run, its cost performance is really very high!"  III. Operation Tips: Strive for Perfection and Prolong Service Life To fully leverage the performance of the XE210WGA and extend its service life, here are a few tips worth noting:  Before operation, conduct a meticulous inspection: Before working in coordination with other equipment such as Scissor Lift and Wheel Loader, it is essential to verify the compatibility of hydraulic interfaces and connection mechanisms to ensure smooth communication and prevent misoperation. Adhere to preventive maintenance: Regularly inspect key components, especially load-bearing and transmission structures similar to Crane Part, and pay attention to their wear conditions. Early detection and prompt handling are crucial to prevent potential problems. Standardize mode switching: When switching between different operation scenarios, strictly follow the operation procedures to change the equipment mode, ensuring the equipment always operates in the best condition. This is vital for safety and extending the equipment's lifespan. In summary, whether it is small-scale infrastructure construction or comprehensive site management in large-scale construction sites, XCMG XE210WGA is a reliable "versatile performer". With its solid performance, it addresses the core issues of equipment diversity, difficult scheduling, and troublesome maintenance, allowing construction teams to focus more on the project itself and thus promoting the efficient and smooth progress of the project.      

  Anyone who does high-altitude work knows all about it. Working indoors, one is afraid of the exhaust fumes from diesel vehicles, the excessive noise, being complained about, and not meeting regulations; working outdoors, one is afraid of the insufficient power of electric vehicles, the lack of electricity causing work to stop, and delaying the project schedule. All these troubles, XQHM has solved for you. Our company has a full range of Articulated Boom Lifts, Articulating Boom Lifts of 100 feet, and various Aerial Work Platforms (AWP), both electric and diesel types. No matter whether it's indoors or outdoors, high-altitude or complex terrain, you can find the suitable equipment. It can not only improve work efficiency but also save unnecessary expenses, and easily handle high-altitude installation, maintenance, and repair tasks.  Product Features  1. Electric Articulated Boom Lift: It doesn't emit exhaust fumes and has extremely low noise. It is suitable for use in shopping malls, hospitals, and factories. The battery has reliable endurance. It doesn't require much maintenance usually. The operation is very flexible and it can fit into narrow areas as well.  2. Diesel Articulating Boom Lift 100ft: Powerful engine, can keep working without running out of power. Equipped with four-wheel drive. It can travel on muddy roads and steep slopes. With a height of 100 feet, it can easily cover large outdoor projects and is not afraid of bad weather.  3. All AWP models share a common feature: the arm can be folded, enabling precise positioning even when encountering obstacles. They also have multiple safety protections, are easy to operate, and can be quickly mastered by beginners.  Selection Tips  1.If it is used indoors or if there are requirements for noise reduction and environmental protection, then choose the electric model. It won't disturb the neighbors and won't cause any compliance issues.  2. If you are undertaking a major project outdoors in a complex terrain, then the diesel model is the best choice. It ensures both power and endurance, and won't delay the construction schedule.  3. If there are both indoor and outdoor tasks to be done, using the two devices together will be both convenient and cost-effective.  In fact, choosing an aerial work platform is quite simple. Just follow your needs. The electric and diesel Articulated Boom Lift and Articulated Boom Lift 100ft from XQHM are reliable and practical, helping you solve all the problems related to working at heights. It makes your work more convenient and efficient.        

  As an employee of XQHM, I understand that in mining and large-scale infrastructure construction, frequent equipment shutdowns, insufficient power, and high fuel consumption are the core pain points, directly causing delays in construction schedules and soaring operating costs, leaving many customers in a situation of "high investment, low return". Therefore, we specially introduce XCMG XE550DK 55 Ton Crawler Excavator with Cummins Engine, supported by the core power of Cummins, precisely addressing industry pain points, helping customers improve construction efficiency and reduce operating costs. This equipment is mainly used for open-pit mining, large-scale earthwork excavation, and infrastructure engineering crushing, and is a core construction equipment that combines efficiency and durability. As a professional XCMG XE550DK dealer, we provide standardized services throughout the process, ensuring that customers can buy with confidence and use with ease. XCMG XE550DK, with its powerful configuration, has become the preferred equipment in the heavy-load construction field. The Cummins engine it is equipped with complies with the third-generation emission standards, has strong power and controllable fuel consumption, and is paired with a 3.6m³ standard bucket, with an excavation force of up to 330kN, easily handling complex operations such as hard rock and large-scale earthwork, without the need for frequent shutdowns and maintenance. We can provide complete XCMG XE550DK specifications, detailing its core parameters such as a working weight of 51500kg, rated power of 309.5kW, and travel speeds of 5.4/3.2km/h, allowing customers to clearly understand the equipment performance.  Product Features (Simplified and Practical):  1. Reliable power: Equipped with a dedicated Cummins engine, it offers powerful performance with a low failure rate. It is suitable for heavy-duty conditions, effectively reducing unplanned downtime and enhancing the continuity of construction.  2. Stable and durable: L-shaped extended heavy-duty chassis with thickened axle diameter design, combined with reinforced working device, is wear-resistant and durable, extending the service life of the equipment and reducing maintenance costs.  3. Efficient Adaptation: The heavy-duty counterweight can precisely match the 200-pound hammer crusher. The dedicated crushing condition control technology can increase the crushing efficiency by over 20%, making it suitable for various construction scenarios.  Tips:  During daily use, it is recommended to follow the specifications of XCMG XE550DK to perform regular engine maintenance, which can further extend the service life of the equipment and reduce fuel consumption.  2. As a formal XCMG XE550DK dealer, we offer both stock supply and customized delivery services. Our after-sales response is prompt, eliminating customers' concerns after use.  The outstanding performance of XCMG XE550DK can not only address the core pain points of heavy-load construction, but also create higher construction value for customers. Whether it is a large-scale mine or a key infrastructure project, choosing XCMG XE550DK supplied by XQHM can achieve efficient construction and low-cost operation. Welcome to inquire and learn about the details of the equipment.  

  In the engineering lifting field, there are common pain points such as insufficient equipment load capacity, unstable operation, poor adaptability, and opaque pricing, which cause delays in construction schedules, safety hazards, and cost overruns for construction companies. To address these issues, XQHM supplies XCMG XCT110 110-Ton Truck Crane, providing solutions tailored to construction needs, covering consultation on new XCMG XCT110 crane in the Middle East, crane for construction, and crane for bridge construction across all scenarios. It balances powerful performance with high cost-effectiveness, widely used in construction, bridge erection, and large equipment lifting scenarios, effectively solving industry pain points and helping construction companies improve efficiency, reduce costs, and ensure safety.    As a reliable equipment supplier, XQHM focuses on the supply and service of XCMG XCT110 110-ton truck crane. This equipment has outstanding core performance, with a maximum rated lifting capacity of 110 tons, a maximum lifting moment of 4704 kN·m for the basic arm, and a fully extended lifting arm length of up to 73 meters. It is equipped with a flexible leg design, with a longitudinal span of 7.7m and a lateral span of 7.9m. The operation stability is top-notch, capable of easily handling heavy-load scenarios such as bridge construction and large-scale building lifting, and perfectly meets the diverse needs of Crane for bridge construction and Crane for construction.  The equipment is equipped with a high-quality power system, with a maximum traveling speed of up to 90 km/h. It can meet the transfer requirements of complex construction sites without the need for additional lifting equipment, significantly improving the construction efficiency. The core components are selected from internationally renowned high-quality brands, which are resistant to wear and tear and reduce equipment failures and maintenance costs, making them suitable for long-term high-intensity operations. At the same time, XQHM can provide a clear and transparent price for the new XCMG XCT110 crane in the Middle East, eliminating hidden charges, offering a worry-free purchasing experience for the buyers. Whether it is bulk purchase or single customization, it can provide stable supply and complete after-sales service.    Compared to ordinary cranes, XCMG XCT110 combines flexibility and safety. It is easy to operate and can be mastered by ordinary operators after simple training, effectively reducing labor costs. The equipment is suitable for various complex working conditions, whether it is urban construction or outdoor bridge erection, it can perform stably and help the construction party shorten the construction period and improve work safety. It has become the preferred equipment in the field of engineering hoisting, and also makes XQHM a reliable equipment supply brand.  Product Features   1.With a rated lifting capacity of 110 tons, it is equipped with powerful power and stable leg design, suitable for heavy-load scenarios such as Crane for construction and Crane for bridge construction.  2. The transition is flexible, no additional hoisting is required, maintenance is convenient, it can reduce construction and maintenance costs, and is suitable for long-term and high-intensity operations.  3. Provide transparent pricing for the new XCMG XCT110 crane in the Middle East. The supply is stable, the after-sales service is complete, and purchasing becomes much more convenient.    Useful Tips   1.Before starting the operation, it is necessary to check whether the leg supports are firmly in place and the operating status of the core components, in order to avoid potential safety hazards during heavy-load operations.  2. Before the transition, it is necessary to clean the equipment and inspect the components to prevent any damage caused by long-distance transportation and to extend the service life of the equipment.  

  For those engaged in construction and lifting operations, there is a common headache: choosing the wrong tonnage and capacity for the crane. Either the tonnage is insufficient and the crane cannot lift the load, or it causes accidents, or the tonnage is too large, resulting in high fuel consumption, cost waste, and difficulty in relocation. What's more troublesome is that there are various types of truck-mounted cranes for sale on the market, and you don't know which one is suitable for your work. Asking for prices doesn't have a direction, which delays the project and incurs losses. XQHM (Xuzhou Xugu Heavy Machinery) comes to solve this problem. Whether you want a new vehicle, second-hand truck-mounted crane, or XCMG G-sqs400-4 truck-mounted crane, we can precisely recommend equipment with the appropriate tonnage and capacity based on your business needs, helping you save costs and improve efficiency, and eliminating the need to make random choices and fall into traps.   To put it simply, choosing the right tonnage and capacity means making more money for yourself. Our XQHM doesn't engage in empty promises. We mainly deal in various truck-mounted cranes, second-hand truck-mounted cranes, scissor lifts, aerial work platforms, and crane accessories. Since our establishment, we have always acted with the mindset of "quality first, customer first", and our products not only meet industry standards but also exceed them, to ensure that everyone can use them with confidence.    Many people have difficulty in choosing the tonnage and capacity of the crane. In fact, it's quite simple. It depends on what you usually lift and the site where you work. For example, if you often do municipal projects and small-scale infrastructure construction, and the items you lift are not particularly heavy, the XCMG G-sqs400-4 Truck Mounted crane is very suitable. Its tonnage and capacity are just right, it's flexible and easy to operate, and it's convenient for moving. Whether in urban narrow areas or on the construction site, it can handle everything smoothly. If your work is heavier and requires a larger tonnage, we also have corresponding equipment. We also have second-hand models available, with excellent cost performance.  No matter which Truck-mounted crane for sale you choose, if you have any questions, feel free to contact us. Request a quote for the crane. We will clearly explain to you the differences in tonnage and capacity, as well as the applicable scenarios. We won't deceive or exaggerate. We will help you select the most suitable one that won't waste money or delay work.  Product Features (Realistic Advantages)  1.The range of equipment is extensive, including new and second-hand truck-mounted cranes, as well as popular models such as XCMG G-sqs400-4. The tonnage and cubic capacity are all available, meeting the needs of various business operations.  2. The quality is guaranteed. All the equipment has undergone strict testing, exceeding industry standards. The failure rate is low, so there is no need for frequent repairs, saving both time and costs.  3. The service is very considerate. Whether it's during the consultation and selection process, requesting a crane quote, or in the subsequent after-sales service, we will follow up throughout the process to help you solve all your problems.  Practical Tips (Summarized by Industry Experts)  1.When choosing the capacity of the hoist, do not go for overly large sizes. Based on the usual lifting weight, add a 10% - 20% safety margin. As long as it is sufficient, that's fine. Otherwise, it would be a waste of fuel consumption and costs.  2. When asking for a quotation from a truck-mounted crane for sale, don't just focus on the base price. Make sure to clarify whether the price includes accessories and after-sales services. Avoid incurring additional costs later.  3. If your budget is limited, it is advisable to choose second-hand car cranes from XQHM. They have good condition and stable quality, and offer a much higher cost-performance ratio compared to new machines. They are suitable for start-up teams or business owners with a lot of scattered work.    In summary, when choosing the tonnage and capacity of a crane, the key is "fitting well". There is no need to blindly pursue large tonnage. As a professional machinery company, XQHM can help you make precise matching. Whether it's the XCMG G-sqs400-4 Truck Mounted Crane or other models, whether you are buying a new one or a second-hand one, it can ensure that you make an informed choice and use it with ease, avoiding unnecessary detours and making more profits.    

 Nowadays, high-altitude work is a headache. Either the equipment can't reach the tricky corners, or it's too heavy and cumbersome to move, or it's unstable and makes people nervous, causing delays and safety concerns. To address these pain points, we introduce the XQHM 16m-XGA18ACK Articulated Boom Lift, which complements Scissor Lift and Telescopic Boom Lift, specifically designed to solve various high-altitude work challenges. Whether it's a narrow site or an area with obstacles, it can reach flexibly and safely, saving time and ensuring safety, making high-altitude work no longer difficult.   This equipment has a wide range of applications, from exterior wall decoration of buildings and factory maintenance to municipal street lamp inspection and ancient building restoration. As long as the work is within 16 meters, it can handle it. Its core value lies in flexibility, safety, and ease of operation, breaking the misconception that high-altitude work is always laborious. Compared to traditional equipment, it saves labor and time, and can also adapt to complex scenarios that Scissor Lift and Telescopic Boom Lift cannot cover. One device meets multiple high-altitude work needs, offering excellent cost performance.    Many people are worried about instability and getting stuck when using high-altitude equipment. But with the XQHM 16m-XGA18ACK Articulated Boom Lift, you don't have to worry at all. It features an articulated design, allowing the boom to bend, extend and rotate 360 degrees. It can easily bypass obstacles and turn flexibly in narrow spaces, unlike some equipment that is cumbersome and difficult to move even a little.  With a working height of 16 meters, it can cover most of the high-altitude operation requirements. The platform can carry two people and their tools, and the load capacity is sufficient for daily use. The operation is also simple, and a novice can get the hang of it after a short period of learning, without the need to hire a professional operator. The machine is not bulky and is easy to move from one site to another. It can operate stably on flat ground both indoors and outdoors. It comes with safety protection devices, ensuring a secure operation at high altitudes.  Product features (in plain language, no fluff):  1.Flexible and unobstructed: The articulated boom can bend, extend and rotate, easily navigating around obstacles and adapting to narrow spaces, complementing the application scenarios of Scissor Lift and Telescopic Boom Lift.  2. Safe and easy to operate: With a height of 16 meters, it suits most needs, has sufficient load capacity, comes with built-in safety protection, and even beginners can quickly get the hang of it.  3. Strong adaptability: Suitable for both indoor and outdoor use, easy to transfer, one machine can handle various complex high-altitude operations, saving labor and time.  Tips for Use:  1.Before starting the operation, it is essential to inspect the boom and safety devices. Only after confirming that there are no issues should you start the machine. Overloading in violation of regulations is strictly prohibited.  2. When working outdoors, if there is strong wind or rain, try to stop using it to avoid potential safety hazards.  3. Regularly lubricate the boom and clean the machine body to extend the service life of the equipment and reduce the need for frequent maintenance.  XQHM 16m-XGA18ACK Articulated Boom Lift, no fancy tricks, only practical high-altitude operation equipment, solving the core problems of high-altitude work for everyone. When used in combination with Scissor Lift and Telescopic Boom Lift, it is more worry-free, making high-altitude work fast, safe, cost-effective and labor-saving.

  The industry's pain points are mainly low hoisting efficiency, unstable operations, and limited application scenarios, which not only increase the labor and time costs for customers but also pose safety risks and fail to meet the demands of various operation scenarios. To address these challenges, XQHM has launched the Truck Mounted Crane Sq12sk3q, integrating the flexibility of Truck with mounted crane and Lorry mounted crane, while also considering the lifting performance of Truck mounted hoist and the loading convenience of Truck loading crane. It can be flexibly dispatched as a Truck mounted mobile crane or Vehicle mounted crane, and is suitable for the compact operation scenarios of Small truck mounted cranes. Equipped with the efficient operation structure of Truck mounted crane with hydraulic boom and Truck mounted jib crane, it is widely used in infrastructure construction, logistics handling, power repair, and other fields, achieving an integrated "lifting + transportation" solution, significantly improving operation efficiency, reducing safety risks, and saving comprehensive costs for customers, demonstrating high cost-effectiveness. As a core product of XQHM, this equipment eliminates redundant designs and focuses on practical performance. Its key features are clear and easy to understand, and the specific product characteristics are as follows:  It features strong and stable load-bearing capacity, with a rated lifting capacity of up to 12,000kg. It can perform 360-degree full rotation operations and is equipped with a high-performance hydraulic system. The hoisting is precise and stable, effectively avoiding the risk of swaying during operations, and is suitable for various heavy-load scenarios.  2. It features outstanding adaptability, with an installation space of only 1300mm, and can be matched with various mainstream chassis. It caters to both compact site operations and long-distance transfer requirements, and is compatible with all kinds of truck-mounted crane-related operation scenarios.  To ensure the long-term operation of the equipment and its optimal performance, here are two practical tips:  Before starting the operation, it is necessary to check the pressure of the hydraulic system and the integrity of the steel wire rope to ensure that the hydraulic pressure meets the 26MPa standard. This is to prevent malfunctions caused by non-compliant operations.  2. For daily parking, it is necessary to clean the equipment and carry out anti-rust treatment. Regularly check the oil level in the fuel tank (standard capacity 160L) and promptly replenish hydraulic oil that meets the specifications to extend the service life of the equipment.  The XQHM Truck Mounted Crane Sq12sk3q focuses on addressing the pain points of the industry, integrating the advantages of various truck-mounted crane-related equipment. It does not pursue redundant functions but only concentrates on the actual operation needs of customers. With its stable performance and flexible adaptability, it has become a practical hoisting equipment in infrastructure, logistics and other fields. It not only reduces the difficulty of operations but also improves operational efficiency, helping customers complete various hoisting tasks efficiently.      

  The most troublesome issue at the construction site is that the trench digging is off, requiring rework and rework, the heavy-duty operation machines cannot withstand the load, and the coordination with the Truck Crane is always delayed due to material shortages. These problems may seem minor, but they actually cause delays in the construction schedule every day, with fuel and labor costs soaring. XQHM has specifically developed the XE3870CA Excavator to address these problems. It relies on intelligent precise control and solid heavy-duty design to solve these troubles, and can also smoothly cooperate with the Scissor Lift and Truck Crane. The Crane Parts it comes with can be quickly delivered without causing delays in maintenance. After using it, there is no need to repeatedly measure when digging and leveling the trench, and the error is only a few centimeters. Heavy-duty operations do not fail either. There is no need to wait back and forth for coordination with other equipment. With it, you can complete more work in a day, the construction schedule is stable, and costs can be reduced significantly.  Whether it's the meticulous excavation for municipal road renovations, the crushing of hard rock in mines, or the multi-machine collaborative operations at large construction sites, the XE3870CA Excavator can handle it all. It is not just an excavator; it is more like a "multi-skilled worker" on the construction site - it can complete delicate tasks perfectly without rework, saving materials and labor; it can handle heavy tasks continuously without frequent shutdowns for maintenance; it can smoothly connect with Truck Cranes for transporting earthwork, and cooperate with Scissor Lifts to tidy up the high-altitude work site without any delay. Plus, the special Crane Part replacement is convenient, and later maintenance doesn't require waiting for parts, significantly reducing downtime and keeping the construction pace always on track.  Core product features:  1.Precise operation without rework: Equipped with an intelligent guidance system, you can clearly see on the screen whether the excavation position is correct. There is no need for manual pre-laying lines for verification. All the tasks such as digging trenches and leveling slopes can be completed in one go, and even beginners can quickly get the hang of it.  2. Heavy-duty and durable construction: The boom and bucket are both of thickened design. The bucket teeth are made of wear-resistant alloy. It can handle hard rocks and heavy excavation loads without breaking, and can operate stably for a long time under high-intensity operations.  3. Smooth coordination without delay： Practical Operating Tips:  It has reserved interface connections for interaction with other devices. When used in conjunction with truck cranes and scissor lifts, it can achieve signal communication, eliminating the need for back-and-forth verbal coordination. The transfer and coordination are very smooth. 1.Before starting work every day, make sure to check the tension of the tracks and the level of the hydraulic oil. When working on a dusty construction site, promptly clean the air filter to prevent the machine from overheating.  2. When changing to different working scenarios, such as from trenching to crushing, the hydraulic system pressure needs to be adjusted properly. When installing attachments like the crushing hammer and soil loosener, make sure the connections are secure before starting the operation.  XQHM has been engaged in engineering equipment manufacturing for many years and is well-versed in the actual needs of construction sites. The XE3870CA Excavator is specifically designed to address the practical problems encountered on construction sites, reducing rework, waiting time, and maintenance, enabling the construction team to steadily advance the project schedule, while saving both time and money.  

    On construction sites, Truck Cranes are used, but the lifting is shaky and heavy objects often fall. If the site is narrow, the crane cannot extend and needs to wait for earth-moving machinery to level the ground first, which delays the project schedule. The operation efficiency is low and it is troublesome. It cannot load several trucks of goods in a day and the cost is high. The Sq12sk3q Truck Mounted Crane from XQHM can solve these problems. It has stable lifting, strong site adaptability, and can also work with a Scissor Lift. The engineering team can use it with ease.   The Sq12sk3q Truck Mounted Crane from XQHM is designed for vehicle use and can be directly installed on the engineering vehicle without the need for a separate trailer. The boom is made of high-strength manganese steel and can be extended in multiple sections, with a maximum extension length of 12 meters. There are 4 adjustable legs at the bottom, with a leg extension width of 3.5 meters, allowing it to support stably even in narrow sites. The operation panel is LCD display, with a clear button layout, and even beginners can quickly master it. It can also be connected to a remote control, allowing operation from a safe distance without having to approach the lifting area. It can work with a Scissor Lift - the crane lifts the heavy object to a high position, and the Scissor Lift carries the workers to install it, without the need for scaffolding, making the operation more flexible.   This crane has a maximum rated lifting capacity of 12 tons, and when the boom is fully extended, it can lift 2.5 tons. It meets the lifting needs of small and medium-sized projects. The maximum working radius is 10 meters, and it can lift heavy objects at heights and from distances. The ground pressure of the legs is ≤ 0.8 MPa, and on soft ground, no excessive steel plates need to be placed to level the ground, reducing the workload of earth-moving machinery. The lifting speed is the fastest at 8 meters per minute, which is 20% faster than ordinary Truck Cranes, and the loading efficiency is high. The total weight is 5.2 tons, which will not add too much load to the engineering vehicle, and the fuel consumption is similar to that of an ordinary truck. The working temperature range is -25°C to 45°C, allowing normal operation in cold winter days and hot summer days, with a low failure rate.   This crane has stable lifting, strong manganese steel boom strength, stable leg support, and when lifting a 10-ton heavy object, the shaking amplitude is ≤ 5 centimeters, which is safer than ordinary Truck Cranes. The site is not picky, and the legs can be extended in a narrow area, even a 3-meter-wide path can be used for operation, without always waiting for earth-moving machinery to level the ground. The efficiency is high, the lifting speed is fast, and it can be remotely controlled, without repeatedly adjusting positions. It can load 3-4 trucks of goods in a day. When combined with a Scissor Lift, it can be used - the crane lifts the heavy object to a high position, and the Scissor Lift carries the workers to install it, without blocking traffic for too long, reducing traffic impact. In the construction of small factories, the crane lifts steel beams and color steel plates, with a fast lifting speed, and when combined with a Scissor Lift, it can shorten the construction period, saving costs compared to renting a large crane.   Choosing XQHM's Sq12sk3q crane can save the engineering team a lot of costs. The operation efficiency is high. With this equipment, we can load several more trucks of goods in a day, and the construction period can be shortened by 3 to 5 days. The site adaptation is strong. We don't need to frequently call for Earth moving machinery to level the ground, which saves the cost of machinery rental. The lifting is stable, reducing the risk of compensation for damaged heavy objects. Remote control also lowers the probability of workers getting injured. When combined with the Scissor Lift, no scaffolding is needed, saving materials and labor costs. The vehicle-mounted design eliminates the need for a trailer, reducing transportation costs, and it is more cost-effective to use it in the long term compared to renting a regular Truck Crane.   Manager Zhang from the logistics park said: "The previous Truck Crane couldn't be used in narrow sites and always had to wait for the Earth moving machinery to level the ground. By replacing it with this XQHM model, a 3-meter-wide passage can be used. The lifting is also fast, and we can load 4 more trucks of goods in a day. It's definitely worth it." Captain Li from the engineering team commented: "Lifting 10 tons of steel bars is very stable without any shaking. The legs are also stable on soft ground. It can also be combined with the Scissor Lift to install street lamps, without the need for scaffolding. The construction period was shortened by 4 days, and the client was extremely satisfied." Master Wang from the municipal maintenance team recommended: "Remote control is extremely convenient. You can operate it from 10 meters away. It's safe and hassle-free. It can work normally even in winter at minus 20 degrees Celsius. The failure rate is low. Our team is now using this model."    

    After ten years in the construction industry, the most terrifying experience I had was a factory equipment lifting project six years ago - we used an ordinary truck Crane to lift an 8-ton equipment. The main boom extended half a beat later than expected, and the legs of the crane were unstable, causing the equipment to shake violently and almost damaging the adjacent production line. Since then, when choosing truck Cranes, I always stick to two words: be meticulous.    Over the years, I have led teams to undertake hundreds of projects ranging from bridges to factories and infrastructure construction. The truck cranes we used were not just a dozen or so; there were actually over seven or eight types. The difficulties we encountered were numerous and could fill a whole basket. It wasn't until three years ago that I came into contact with the truck cranes of XQHM and finally felt completely at ease. Today, I won't talk about those meaningless parameter terms. Instead, I'll share with you the practical experience I've gained from real-world operations. And I'll explain why, for any project now, I only trust XQHM truck cranes.  In the past, I chose the regular truck crane because it was cheaper. But later on, it turned out to be full of troubles.    During the years when I was in charge of the team, the boss was always urging us to control costs. So when making purchases, we could only choose cheaper truck cranes. Looking back now, all those savings were achieved by trading off the construction period and safety risks.    Once, during the construction of a bridge in the suburbs, we chose a regular truck crane. The speed of the main winch was only 90 meters per minute. It took several hours to lift one prefabricated beam. The original plan was to complete the lifting in 10 days, but it was actually delayed to 14 days. Just the overtime pay for the workers alone cost a lot more. What was even more worrying was the stability. The support legs of that equipment were only 4.2 meters in length. When operating on soft ground, several layers of steel plates had to be laid down. Even for slightly important components, when lifted, the vehicle body would start to shake a little. Every operation was nerve-racking.    There was another even more thrilling incident. In the factory relocation project, the main boom of the ordinary truck crane was too short. Even when combined with the auxiliary boom, the lifting moment was still insufficient. When lifting a 12-ton machine tool, the boom noticeably sank, which scared us into stopping immediately. Since then, I have come to understand that when it comes to truck cranes, one should not just focus on the price; reliability is the top priority.    The truck crane of XQHM can truly handle heavy loads in actual combat situations.  The first time I used the XQHM truck crane was on a construction project in a large industrial park. We needed to lift a batch of heavy equipment, and also needed to cooperate with earth-moving machinery to level the ground and use wheel loaders to transport materials. The efficiency of the lifting operation was extremely demanding. Surprisingly, this equipment immediately solved a bunch of problems that the ordinary equipment couldn't handle.  Let's start with the most obvious aspect - efficiency. The main and auxiliary hoisting machines can operate at a single-rope speed of 130 meters per minute when the hook is empty. This is nearly half faster than the previous ordinary equipment. When lifting the same weight of equipment, it used to take 20 minutes, but with this device, it can be done in just 12 minutes. As a result, the entire project's hoisting duration was directly shortened by 3 days. Later, I specifically checked the parameters and found out that the longest main arm can reach 34 meters, and when combined with the auxiliary arm, it can extend to 44.7 meters. In a previous high-rise factory project, when it was necessary to lift equipment to a 28-meter-high platform, there was no need to build additional scaffolding, and it could be placed directly in position, saving a lot of effort.  Its stability is simply outstanding. The horizontal and vertical span of its legs can reach 5.68x5.01 meters, which is much wider than that of ordinary equipment. Last year, when conducting wind power foundation hoisting in a mountainous area, the ground was uneven. We originally thought it would be a big hassle to deal with the site, but as soon as this equipment extended its legs, it was perfectly stable, lifting a foundation component weighing up to 20 tons, with the vehicle body not showing any vibration at all. Moreover, its arm extension and lifting speeds are also fast. It takes only 67 seconds to fully extend, and 48 seconds to fully lift and lower. The operation connection is extremely smooth, and there is no need for on-site workers to wait for the equipment.    XQHM not only offers truck cranes, but also provides a wide range of equipment that can be used more conveniently in combination.  After using the truck crane from XQHM, we subsequently purchased other equipment from their company such as the Scissor Lift. Currently in our project, we have basically formed a "XQHM equipment combination" - the truck crane is used for the core lifting operations, the Scissor Lift assists with high-altitude auxiliary tasks, earth-moving machinery levels the ground, and the wheel loader transports materials. The performance compatibility of these equipment is extremely high.  For instance, in a commercial complex construction project, when a truck crane lifts large steel structures, the workers on the scissor lift can simultaneously make positioning adjustments. The two work in perfect harmony, which is much smoother than when using different brand equipment before. Later, it was learned that XQHM is the brand of Xuzhou Xugui Heavy Machinery Co., Ltd. They not only produce truck cranes, but also offer used truck cranes, aerial work platforms, crane parts and other full range of products. They have always adhered to the principles of "quality first, customer-oriented, and integrity-based". No wonder the product quality and adaptability are so good.  Over the past few years of working with them, there is one aspect that I am particularly satisfied with - their service. Once in a project in a remote mountain area, there was a minor issue with the equipment. After contacting the manufacturer, the technician arrived the next day and quickly resolved the problem, without causing any delay to the schedule. Such a reliable brand is worthy of long-term cooperation.  Sincere advice for engineers and importers  Finally, I want to say something heartfelt to all my colleagues. When choosing a truck crane, don't be tempted by low prices. A reliable piece of equipment can help you save time, reduce labor costs, and avoid safety risks. These benefits are far more important than the money spent upfront.  If you are purchasing a truck crane, or need to combine it with equipment such as a scissor lift, earth-moving machinery, or wheel loader for a project, I sincerely recommend that you take a look at XQHM. Over the past three years, I have used their truck cranes, and they have never failed even during high-intensity lifting operations or complex site work.  I have compiled the project cases and operation insights from the XQHM equipment over the past few years into a device selection guide. It contains suggestions for equipment combinations in different project scenarios. If you want to know the specific operation performance of the XQHM truch Crane, or have any questions about equipment selection, you can leave a message below. I will share my practical experience without reservation with all of you. [Click here to view the XQHM product series]  

      In the field of engineering construction, excavators often encounter industry pain points such as poor adaptability to multiple scenarios, high fuel consumption, and frequent failures of core components, which directly lead to increased equipment investment, decreased construction efficiency, and rising maintenance costs. XQHM has been deeply involved in the service of construction machinery equipment for many years and has collaborated with well-known brands to launch the XCMG XE210WGA Excavator. It has also established a complete equipment support system for construction projects with Aerial Platform Truck, Concrete Machinery, and Truck Mounted Crane. This excavator solves the industry pain points at their root through core power upgrade and structural optimization, enabling efficient operation in multiple scenarios, significantly reducing fuel consumption and failure probability, and providing a solid core support for municipal construction, mining, road construction, and other fields.    As the core equipment for construction projects, the core value of XCMG XE210WGA Excavator lies in its flexible and efficient operation performance, which can adapt to various construction scenarios and provide stable support for project progress. Its applications are extensive: it can be used for river dredging and pavement crushing in municipal construction, as well as for ore loading and site leveling in mining operations. It can also be used in conjunction with Concrete Machinery for soil excavation during foundation pouring. In road construction scenarios, it can work in coordination with Truck Mounted Crane to complete material transportation assistance tasks, and be paired with Aerial Platform Truck to ensure the foundation preparation in high-altitude operation areas. For construction companies, it can reduce the hassle of switching between multiple equipment and improve the utilization rate of a single piece of equipment; for project managers, its low-consumption and stable performance can control construction costs; for operators, the user-friendly design can reduce the work intensity and enhance the operational comfort.    The most significant breakthrough of this XCMG XE210WGA excavator lies in the dual innovations of its power system and working structure. Equipped with a self-developed high-pressure common rail engine and an intelligent electronic control system, it can automatically adjust the output power according to the working load, and its fuel consumption is over 15% lower than that of similar excavators in the industry. A municipal construction team previously used ordinary excavators for river dredging operations, with a daily fuel consumption of 80L. After switching to this model of excavator, the daily fuel consumption dropped to less than 68L, and the monthly fuel cost savings reached nearly 4,000 yuan. At the same time, the equipment adopts an enhanced working device. The bucket arm and the bucket are made of high-strength wear-resistant steel, and undergo multiple heat treatment processes, which extends the service life by 30% compared to ordinary models, effectively reducing the failure problems caused by the wear of core components.    To address the problem of poor adaptability in various scenarios, this excavator adopts a design with quick-switchable operation modes, equipped with various types of buckets, crushers, and other attachments. It can precisely adapt to various tasks, including the excavation of soft soil, the crushing of hard rocks, and the precise leveling of construction sites. In the mining scenario, its maximum digging force reaches 150kN, enabling it to easily meet the demands of high-intensity loading. In the municipal road maintenance scenario, the flexible rotation mechanism can operate efficiently in narrow spaces, avoiding damage to surrounding facilities. Additionally, the walking system of the equipment adopts an enhanced rubber track design, with a lower ground contact pressure. It is less likely to get stuck on muddy and rough terrains, significantly improving the stability of passage.    In terms of operation experience and ease of maintenance, this product also performs exceptionally well. The cab adopts a suspended design, equipped with air-suspended seats and heating/cooling air conditioning, which effectively reduces vibrations and noise during operation, enhancing the comfort of the operator during long working periods. It is equipped with an intelligent monitoring system that can display real-time information such as equipment fuel consumption and fault warnings. The operator can grasp the equipment's operating status through the dashboard. The core components of the equipment are arranged reasonably, and the inspection ports are spacious. Daily maintenance and fault troubleshooting do not require the removal of too many components, significantly reducing the maintenance time. XQHM also provides dedicated maintenance services for this equipment, along with complementary inspection plans for equipment such as Aerial Platform Truck and Concrete Machinery, to comprehensively ensure the smooth progress of construction.    Compared with other models in the same category, the XCMG XE210WGA Excavator has also achieved a breakthrough in terms of environmental performance. The engine meets the national IV emission standards and is equipped with an efficient exhaust treatment system, significantly reducing pollutant emissions and fully meeting the current environmental protection requirements for construction projects. In multiple municipal projects with strict environmental standards, this equipment, with its excellent environmental performance and stable operation, has become the preferred equipment for construction companies.  Product Features 1.Equipped with an intelligent power system, it features low fuel consumption and sufficient power, achieving a balance between operational efficiency and economy.  2. Most of the devices are designed with adaptability in mind, enabling them to be used in various construction scenarios without the need for frequent equipment replacements.  3. Enhanced structural components have excellent wear resistance and durability, significantly reducing the probability of failure and operational costs.  Tips: 1.It is recommended to select the appropriate attachments according to different working scenarios to avoid using the ordinary bucket for high-intensity crushing operations, thereby extending the service life of the equipment.  2. After daily operations, it is necessary to promptly remove the dirt and impurities from the tracks and chassis. Regularly check the oil level of the hydraulic system to ensure that the equipment is in good operating condition.  

    In the field of high-altitude operations, the contradiction between safety and efficiency has always been difficult to resolve: ordinary Aerial Work Platform GF either has a small working radius and requires repeated vehicle movements for moving to higher altitudes; or has poor stability and is prone to shaking in complex sites; even worse, some equipment is heavy and difficult to transport, and combining with Truck Crane for site adjustment increases costs. Scissor Lift is also limited to low-altitude scenarios. This has greatly troubled the engineering team - the project schedule is hindered by the equipment, safety hazards loom in the minds, the cost of site adjustment keeps rising, and many projects, despite having sufficient manpower, are still behind schedule due to the inadequate equipment. To address these pain points, XQHM has launched the 20mXGS22ACK-LI Telescopic Boom Lift, precisely solving the core bottlenecks of high-altitude operations.    The actual operation results far exceeded expectations: With a 20-meter working height and a flexible telescopic arm design, the working radius is wider, allowing for large-scale operations without frequent equipment movement; the chassis is equipped with a stabilization system, enabling stable anchoring even on uneven ground, significantly enhancing the safety factor. It can also be coordinated with Truck Cranes for transfer, is lightweight and easy to move, and has a transfer efficiency increase of over 50% compared to traditional Aerial Work Platforms GF. It can also handle Scissor Lifts that cannot reach high places, and can easily handle such scenarios. For the engineering team, the core effect is immediate: The efficiency of high-altitude operations has improved, and the original 3-day job can now be completed in 2 days;安全隐患 has been nearly eliminated， and there is no longer any need to worry about the risk of falling from heights； The site-moving cost has been reduced by 40%， and the overall project profit margin has been directly expanded.    The core value of this 20mXGS22ACK-LI Telescopic Boom Lift lies in achieving a triple breakthrough of "safety, efficiency and low cost" for high-altitude operations. Its application scope is extremely wide. It can be used for factory maintenance, exterior wall decoration, bridge maintenance, venue construction, and any other scenarios involving high-altitude operations. It can either complete the operation tasks independently or be combined with Truck Crane and Scissor Lift to form a complete high-altitude operation solution. Compared with similar equipment on the market, it best understands the actual demands of engineers. It does not engage in flashy and impractical designs but focuses on "operating range, stability, and ease of transportation" to achieve excellence.  Core Product Features  1.Flexible operation: With a height of 20 meters and a large working radius, it is suitable for various high-altitude operations in different scenarios, compensating for the height disadvantage of the Scissor Lift.  2. Stability and Safety: The exclusive chassis stability system ensures smooth operation even in complex terrains, reducing the risk of working at heights.  3. Seamless transition: It can be transferred in coordination with the Truck Crane, resulting in high site relocation efficiency and reducing additional cost expenditures.  Practical Homework Tips  1.Before starting the work, it is necessary to inspect the flatness of the site and extend the outriggers in accordance with the specifications to avoid performing the operation forcefully on soft ground.  2. When working in conjunction with the Truck Crane, it is necessary to precisely determine the placement location of the equipment to prevent any bumps or damages during the transportation process.  3. Regularly inspect the hydraulic system and lifting mechanism of the equipment. If any abnormalities are detected, stop the machine immediately for maintenance to extend its service life.  Now, many engineering companies have reported their feedback after using the XQHM 20mXGS22ACK-LI Telescopic Boom Lift. The most surprising thing is that "there is no need to compromise between safety and efficiency anymore". When used in combination with Scissor Lift and Truck Crane, the entire process of high-altitude work becomes more smooth. XQHM has always been deeply involved in the field of engineering equipment. By deeply understanding the industry's pain points, it has created products that better meet actual needs. Whether you are conducting large-scale engineering maintenance or small-scale venue decoration, this articulated boom high-altitude work platform can become a reliable helper.  

  The veteran workers in mines and construction sites all have a common concern: large excavators either force themselves to "bear heavy loads" under pressure, resulting in a sharp increase in failure rates, and a single machine having to wait for the entire team to assemble before it can resume work; or they deliberately "slow down" to maintain stability, prolonging the construction period and reducing profits. What's more challenging is that some equipment is out of sync with Concrete Machinery and Truck Mounted Cranes, leaving gaps in the process of loading, transportation, and excavation. This is no small problem - the loss of a day's work, the expenses for frequent repairs, and the penalty for delayed construction deadlines all weigh heavily on the construction companies, making them struggle to breathe. To address this issue, Xuzhou Xuqi Heavy Machinery Co., Ltd. (XQHM) has precisely launched the XCMG XE3870CA tracked excavator, as the flagship model of the XCMG XE series 1.5-70 ton tracked excavators. It breaks the vicious circle of "heavy loads causing damage and high efficiency consuming a lot of fuel", making heavy-load operations both stable and fast, and enabling seamless connection with other equipment.  The actual performance turned out to be much better than what the construction teams had expected: During heavy mining operations in the mine, its power output was uniform and not overly aggressive. It continued to operate without any malfunctions for a week. When used in conjunction with Truck Mounted Cranes for transportation and Concrete Machinery for pouring, the movements were precisely coordinated, and the idle time was reduced by 40%. For the customers, the core effect is clear: The failure rate was reduced by over 60%, eliminating the need to keep spare machines on standby; the operation efficiency was increased by 35%, and the project could be completed in 8 days instead of the original 10 days; the fuel consumption was 25% lower than that of equipment in the same category, and in the long run, it was a considerable saving. More importantly, its value goes beyond "digging"; it can also serve as a "core connection point" at the construction site, driving the efficiency upgrade of the entire equipment system. This is also the core principle of XQHM - "centered on customer needs". Besides this excavator, XQHM also supplies a full range of equipment such as Used Truck Cranes and Scissor Lifts, helping customers solve the pain points of engineering equipment in one go.  This excavator is suitable for heavy-load scenarios such as mine stripping, large-scale factory infrastructure construction, and road widening. Whether it is for hard-rock excavation or continuous loading, it can handle the tasks with ease. Compared to ordinary equipment, it better understands the actual needs of engineers: there is no need to choose between "stability" and "speed", nor is there a need to allocate additional manpower for equipment coordination. It truly achieves "one piece of equipment driving the efficiency of the entire team".    Core Product Features    1.Overloading is not "fragile": As the flagship model of the XCMG XE series 1.5-70 ton tracked excavator, the core components have undergone rigorous testing, ensuring that it can operate continuously under heavy loads without malfunctions.  2. Collaboration without "disconnection": Precisely match the operation rhythms of Concrete Machinery and Truck Mounted Crane, reducing the idle periods between equipment connections;  3. High efficiency without "fuel waste": Intelligent control of power output results in lower fuel consumption compared to similar equipment by 25% even under heavy loads, achieving a balance between efficiency and cost.  Practical Homework Tips    1.Before performing the first load operation, it is recommended to conduct a 30-minute unloaded warm-up period to allow the equipment components to fully "warm up" and extend their service life.  2. When working in conjunction with Truck Mounted Cranes and Concrete Machinery, the operation routes can be pre-set in advance. The precise control of the equipment can reduce the adjustment time.  3. Daily maintenance should be carried out in accordance with the exclusive plan provided by XQHM. The focus should be on checking the tension of the tracks and the hydraulic system to prevent small issues from escalating into major failures.    Nowadays, many construction companies that have been engaged in heavy-load projects have become repeat customers of XQHM after using the XCMG XE3870CA. They have reported that the most remarkable feature of this excavator is that it "understands engineering and understands costs", eliminating the need for the construction companies to compromise at various points. XQHM has always adhered to the principles of "quality first, customer-oriented, and integrity-based", and in addition to this flagship excavator, it can also provide customers with solutions for all types of engineering equipment. In the context of economic globalization, XQHM also warmly welcomes global enterprises to join hands and cooperate to achieve mutual benefit and win-win results.

  Those doing high-altitude work dread encountering troublesome equipment! Ordinary Aerial Work Platform GF either has insufficient lifting height, leaving a gap when reaching the desired location; or the platform shakes too much, making workers feel nervous and prone to making mistakes; or the operation is complex, not coordinating smoothly with Truck Cranes or Earth-moving machinery, causing delays in construction. This is really frustrating - the project schedule can't be met, workers' safety is not guaranteed, and costs keep rising. - Everyone would be annoyed if they had to choose. The aerial work vehicle from XQHM, GKS22, specifically addresses these issues! It's like a reliable "high-altitude helper", with sufficient lifting height, a stable platform like a flat surface, and simple operation. Whether working alone or in coordination with Truck Cranes or Earth-moving machinery, it operates smoothly and efficiently, reaching full productivity. This aerial work vehicle is truly capable. With a lifting height of 22 meters, it can see farther and reach further than ordinary Aerial Work Platform GF, suitable for municipal street lighting repairs, factory equipment installation, and construction scaffolding setup. The platform has strong load-bearing capacity, capable of accommodating 2-3 workers and equipment. The key is its stability! Even in strong winds, the platform doesn't shake, and workers can focus on their work without worrying about balance, ensuring safety and efficiency. The operation design is particularly user-friendly. The control panel is simple and clear, with few buttons but easy to use. Even beginners can understand it after a quick glance and don't need special training. The vehicle can turn flexibly, allowing it to navigate through narrow construction sites and urban streets without having to move around. The most practical aspect is its strong adaptability, capable of cooperating with Earth-moving machinery for trench excavation and wiring, and with Truck Cranes for lifting and installing high-altitude equipment. One vehicle can handle multiple functions, saving a lot of equipment costs. Real highlights High and stable: 22-meter lifting height, the platform doesn't shake, and working at heights is reassuring; Easy to operate: Simple operation, even beginners can quickly master it, without spending time learning; Wide adaptability: Can work in coordination with Truck Cranes and Earth-moving machinery, suitable for various scenarios. Working tips Before starting work, check the platform guardrails and hydraulic system. If the ground is uneven, stabilize it first. Don't compromise on the operation; During operation, never overload, don't pile tools and people together, keep the platform balanced; Regularly maintain the hydraulic system and tires, and maintain them more frequently to reduce malfunctions during work. Whether it's municipal street lighting repairs, advertising board installations, or factory equipment maintenance and construction scaffolding setup, this aerial work vehicle GKS22 can handle it. Compared to ordinary Aerial Work Platform GF, it is both stable and flexible; when cooperating with Truck Cranes or Earth-moving machinery, it can enhance overall construction efficiency, and choosing this vehicle is definitely the right choice for high-altitude work. People who have used it all praise it. Construction team leader Li: "Before, the aerial work vehicle I used was shaky, and workers were afraid to work. After switching to XQHM GKS22, the 22-meter height is very stable, and when cooperating with Truck Cranes for equipment installation, the efficiency is 30% higher than before!" Manager Wang of the equipment dealer: "This vehicle has an extremely good reputation in the engineering community. It has a very high lift height, is easy to operate, and can also be used in conjunction with earth-moving machinery. The repeat customers exceed 80%, and all the customers who have purchased it praise its reliability!"  

Anyone in the construction industry knows that choosing the wrong truck-mounted crane can cause serious problems!   Ordinary truck cranes are either too weak to lift even slightly heavy building materials and equipment, wobbling and dangerous; or too complicated to operate, with a bunch of buttons that are overwhelming, leaving novices clueless even after a long learning curve; even worse, they don't coordinate well with earth-moving machinery, each working independently, directly slowing down the construction progress. This is incredibly time-consuming! With tight deadlines, equipment malfunctions, workers waiting to be worked, and costs constantly rising—it's a headache for anyone. The XQHM XCMG Sq12sk3q Truck Mounted Crane doesn't have these problems. Like a reliable old partner, it specifically solves these pain points, working quickly and steadily. This truck boasts a reliable lifting capacity, ensuring stable lifting even with heavy loads. It's significantly more efficient than a regular truck crane, completing jobs that previously required two trips in a single run. Operation is simple, thanks to its intelligent control system and clearly laid-out buttons. Even beginners can master it at a glance, without needing an experienced operator; even a skilled person can operate it. Most practically, it's highly adaptable! It integrates seamlessly with earth-moving machinery, providing perfect support for lifting steel bars and concrete piles at construction sites, and loading and unloading heavy equipment at logistics yards. For high-altitude operations, it can be used in conjunction with the Aerial Work Platform GF, effectively replacing two machines with one, saving considerable money. The truck's flexible design and small turning radius allow it to maneuver easily in narrow construction sites, eliminating the need for frequent repositioning and saving significant time. Several solid highlights: Powerful and stable: Lifts heavy loads without swaying, more capable than ordinary truck cranes, and reliable even under heavy loads; Easy to use: Simple operation, even beginners can quickly master it, requiring no extensive training; Versatile: Compatible with earth-moving machinery and Aerial Work Platform GF, handling any engineering scenario.   Points to note when working:   Before starting work, inspect the boom, wire rope, and hook. Repair any wear or looseness immediately; don't compromise;   Never overload! Do not stand below during lifting operations; safety is always the top priority;   Regularly lubricate and maintain the boom's hydraulic system. Don't wait until a malfunction occurs to panic; regular maintenance reduces downtime.   Whether it's a construction site, logistics loading and unloading, municipal construction, or factory relocation, this truck crane can be used. Engineering work prioritizes efficiency and reliability, and this XQHM model perfectly meets those needs.   Users rave about it!   Construction team leader Wang: "Our old truck crane would wobble when lifting heavy loads, and it was complicated to operate. After switching to this XQHM model, it lifts steadily, is easy to learn, and works exceptionally well with earth-moving machinery. Our construction site was completed 5 days ahead of schedule!"   Equipment dealer manager Li: "This truck-mounted crane sells exceptionally well in the construction industry. It can lift heavy loads and also work with the Aerial Work Platform GF for high-altitude operations. It's suitable for various scenarios, and our repeat customers exceed 85%!"  

Large excavators generally have weak power and frequent stalling during hard rock operations, which affects progress. Long-term high fuel consumption, with monthly fuel expenses accounting for nearly 40% of operating costs. Insufficient durability of core components, requiring maintenance every 200 hours. These problems have led to low efficiency and thin profits in mining and infrastructure construction. XCMG XE650GK Excavator solves these problems with a 350kW powerful engine, intelligent energy-saving system, and reinforced body structure. It works smoothly with Truck Crane and Scissor Lift, increasing hard rock excavation efficiency by 20% while reducing fuel consumption by 15%, making heavy-duty operations both efficient and economical.   XCMG XE650GK Excavator is a large excavator designed for high-intensity scenarios. Its high-power diesel engine provides stable output, and the maximum digging force of 600kN enables efficient hard rock stripping and mining without repeated impacts. The intelligent hydraulic system automatically adjusts power output based on load, avoiding unnecessary fuel consumption. The 3.5-5.0m³ large-capacity bucket, combined with an optimized operation cycle, increases the single-dig volume by 12% compared to similar equipment. As a core equipment on the construction site, it can quickly dig materials and seamlessly connect with Truck Crane, reducing transfer waiting time. In high-altitude operation areas, it works precisely with Scissor Lift to handle basic obstacles, suitable for multiple scenarios such as mining, high-speed infrastructure, and river widening. The body is made of Q690 high-strength steel welded, with thickened protective plates in key areas. Crane Part and other core components have undergone 1000 hours of rigorous testing, with wear resistance and impact resistance far exceeding industry standards.   The equipment has a rated power of 350kW, a maximum digging depth of ≥7.8m, and can complete 280m³ of hard rock excavation per hour. Fuel consumption is controlled at 25-30L/h, 8-10L lower than the average level of similar power equipment. The bucket is made of NM450 wear-resistant alloy material with reinforced edge design, extending the service life by 30% compared to ordinary buckets. Ground pressure is 48kPa, making it less likely to get stuck in complex terrain. A high-definition 360° panoramic camera and intelligent monitoring system display real-time data such as hydraulic oil temperature and engine speed. The wear of Crane Part and other accessories can be predicted in advance to avoid sudden failures.   Product features 1. Strong power and high efficiency: 350kW engine with 600kN digging force, no stalling during hard rock operations, leading efficiency among similar equipment. 2. Intelligent energy-saving design: Load-adaptive fuel consumption adjustment, saving over 150,000 yuan in fuel costs annually over long-term use. 3. Strong compatibility: Smooth cooperation with Truck Crane and Scissor Lift, no additional debugging required in multiple scenarios.   Tips 1. When working on hard rock, keep the bucket insertion angle between 30° and 45° to avoid overloading and damaging the hydraulic system. 2. Check the connection tightness of Crane Part every 500 hours and replace the hydraulic oil filter and lubricating oil according to the cycle. 3. When cooperating with Truck Crane, plan the material stacking area in advance to shorten the turning radius and improve loading and unloading efficiency. In mining, it can strip 3200m³ of rock layers per day, and when cooperating with Truck Crane, it realizes the integration of excavation and transportation, saving 8 hours of operation time compared to traditional equipment combinations. In large-scale infrastructure projects, during foundation excavation and river channel widening operations, the intelligent energy-saving system enables continuous operation for 10 days with only 6,000 liters of fuel consumption. At road construction sites, when clearing obstacles from the roadbed, it works in coordination with Scissor Lifts to precisely handle the hard rock layers beneath high-altitude operations, ensuring construction safety. After its application in an open-pit coal mine project, the construction period was shortened by 30%, fuel costs were reduced by 22%, and maintenance frequency was decreased by 40%. Manager Li from a mining project said, "Previously, when excavators were digging hard rock, they had to repeatedly impact it, consuming over 40 liters of fuel a day. After switching to the XE650GK, with its 350kW power, one bucket can dig through the rock, and fuel consumption is controlled at around 28 liters. The coordination with Truck Cranes for material transfer has also improved efficiency." Mr. Zhang, the general manager of an infrastructure construction company, commented, "The Crane Part of this equipment is very reliable. It has been operating at high intensity for half a year without any loosening. The intelligent monitoring system can predict faults in advance, eliminating the need for frequent shutdowns for inspection as before." Mr. Wang, an engineering equipment purchaser, recommended, "After comparing three excavators of the same level, the XE650GK stands out in terms of power and energy efficiency. When working in coordination with Scissor Lifts, the operation is particularly smooth. Our three heavy-load projects all finished ahead of schedule with this equipment."      

    Product Description The XQHM XE135E hydraulic excavator, as the main model of the 13-ton class, has been deeply optimized for medium and large-scale earthwork and complex working conditions. Its modular structure enables rapid adaptation for scenarios such as Truck Crane loading and unloading, Scissor Lift high-altitude operations, etc. The entire machine adopts the latest industrial design language, enhancing the fatigue resistance of structural components, and is suitable for various Earth-moving machinery operations in municipal construction, mining, and agricultural water conservancy, among others.  Technical Specifications This equipment is equipped with a turbocharged engine that meets the national IV emission standards. Its rated power is 85 kW, the bucket capacity is 0.52 m³, and the maximum digging depth is 6.45 meters. The standard 3.8-meter short tail slewing design enhances the passability in narrow spaces, and the walking speed reaches 5.5 km/h. The hydraulic system adopts dual pump constant power control technology, with the flow distribution accuracy improved by 12%.  Product Features and Advantages • Energy Efficiency Management Upgrade: The intelligent power matching system can reduce fuel consumption by 17%, and the 2000-hour maintenance cycle is 25% longer than that of competitors • Adaptability to Compound Operating Conditions: The reinforced X-shaped frame and floating chassis design increase the load-bearing capacity by 15% and reduce vibration transmission by 40% • Intelligent Interaction and Iteration: The 7-inch full-color display integrates device self-checking, fuel consumption statistics, and fault warning functions, and supports remote data interaction  Application scenario It is suitable for heavy Earth moving machinery operations such as excavation of building foundation pits, road slope trimming, and removal of mining stripping layers. It can work in conjunction with Truck Cranes to complete material transportation, or be combined with Scissor Lifts in factory construction to implement three-dimensional construction plans. The success rate in complex situations has increased by 30%.  Customer Benefits The actual measurement data of a provincial infrastructure construction enterprise shows that after using XQHM XE135E, the construction period of each earthwork project was shortened by 19%, and the average fault-free working hours of the equipment exceeded 4,300 hours. The maintenance cost of the hydraulic system throughout its life cycle was reduced by 28%, the overhaul cycle of the engine was extended to 12,000 hours, and the annual operating benefits increased by over 350,000 yuan.  Customer Reviews and Recommendations "Compared to similar models, the low-loss hydraulic circuit design of the XE135E significantly enhances the smoothness of the combined actions. Especially when used in pile foundation projects in conjunction with the Scissor Lift for high-altitude reinforcement, the micro-motion control accuracy fully meets the requirements of construction to the millimeter level." — Li Mingkai, Director of the Equipment Department of Huajian Group  FAQ Q: Is the hydraulic system suitable for operations in cold regions? A: Standard - a -30℃ low-temperature starting device is equipped, and the hydraulic oil temperature control module can maintain the stable output of the system in extremely cold environments. Q: Can it be connected to the intelligent dispatching system of the Truck Crane? A: The equipment is reserved with a CAN bus interface, and it supports data interaction with devices such as Truck Crane through the Internet of Things. Q: Can the bucket be replaced with a crushing hammer? A: A quick-change connector is standard, and it can complete the switching of equipment such as the crushing hammer and soil loosener within 15 minutes, adapting to the needs of multiple types of work.

    In the fields of infrastructure construction, mining, and large-scale earthwork projects, traditional earth-moving machinery often faces efficiency bottlenecks: insufficient power limits the daily operation volume, high fuel consumption raises operating costs, and poor adaptability to complex terrains easily leads to equipment failures. When clients undertake comprehensive projects involving the coordinated operation of Truck Cranes and Aerial Work Platforms GF, the performance of the excavator lags behind, resulting in delayed overall project progress, chaotic resource allocation, and even additional losses due to equipment downtime for maintenance.    The XCMG XE3870CA crawler excavator is centered around "efficiency, energy conservation, and stability". It is equipped with a customized power system and intelligent control technology, and its daily earthwork output is 25% higher than that of traditional models. The fuel consumption is reduced by 18%. It is suitable for various scenarios such as mining rock crushing, municipal road excavation, and port yard consolidation. It forms a "ground-air coordination" operation system with Truck Crane and Aerial Work Platform GF, and can simultaneously complete heavy object hoisting, high-altitude maintenance, and ground excavation tasks, significantly shortening the project cycle.    Product Features High power and low fuel consumption: Equipped with the Cummins QSL9.3 engine with a rated power of 225kW, combined with the EPB electronic controlled positive flow system, it achieves a precise balance between power and energy saving. All-terrain passability: The reinforced crawler plate and four-wheel one-line design result in a ground pressure of only 38kPa, enabling stable operation in complex terrains such as soft soil and slopes, reducing the risk of getting stuck. Intelligent operation: The 7-inch color display integrates fault diagnosis and work mode switching functions, supports remote monitoring, and reduces operational difficulty and maintenance costs. Tips for use Regularly check the crawler tension: Adjust the crawler tension once every 500 hours to avoid derailment due to loose crawler or accelerated wear due to tight crawler. Replace filter elements in stages: Replace the air filter every 250 hours and the oil filter every 500 hours to prevent impurities from entering the engine and affecting performance. Optimize operation path: In gravel conditions, avoid continuous high-load excavation of hard rock and adopt the "layered stripping + intermittent operation" method to extend the life of the bucket. From mines to urban construction sites, the XCMG XE3870CA crawler excavator with technological breakthroughs redefines the efficiency standards for earthwork operations, providing solid support for the collaborative construction of equipment such as Truck Cranes and Aerial Work Platforms GF, and helping customers achieve dual improvements in cost reduction, efficiency enhancement, and quality improvement.